Was ist PVC-Extrusion?

Was ist PVC-Extrusion?

If you are wondering what is pvc extrusion, there are a few different processes that can make it possible for you to manufacture the material you need. The most common types are 5.8m x 5.95m white sheets and PVC profiles. When you are planning to use these sheets for construction projects, you must make sure that you understand how these processes work before you begin. Read on to discover the benefits of each.


Co-extrusion is an advanced manufacturing technique that involves combining two different raw materials, usually plastics, through a single die. Various material properties can be combined, such as rigidity and flexibility. This process is ideal when a single material cannot meet the requirements of the design. In addition, co-extrusion is both environmentally friendly and cost-effective. To learn more about co-extrusion, read on!

The process of co-extrusion involves melting each material in a separate extruder. After melting, the output of one extruder is split into two or more layers. The materials are delivered to a manifold, or directly to the die, and combined in a way that retains individual resin layers. Co-extrusion is a viable option for producing blown films and cast film, as these materials can be processed in the same way as single-layer materials.

Coaxial twin screw extruders

The emergence of Coaxial twin screw extruders for PVC extrusion is significant for the development of advanced plastic processing technology. They feature high specific energy inputs and high mixing efficiency. Furthermore, they can process various solids and highly viscous materials. These advantages make them appealing for various industrial processes, including compounding, blending and extrusion of plastics. However, to optimize their screw set up, dynamic models are needed.

The twin screw extruders are highly versatile, with high heat exchange rates. They are particularly useful for the processing of sticky materials. Furthermore, they are cost-effective, energy-efficient and customizable, and are suitable for a wide range of applications. As a result, they are a good investment for a variety of industries. Some models have multiple screw configurations, whereas others have single or parallel screw configurations.


If you want to create a variety of materials, compounding your PVC will help you do just that. Compounds are used for many applications from toys to garden hose pipe to luggage, handbags, and even the soles of shoes. To learn more about the process, read on! And don’t forget to check out our articles about this process, too! This is an overview of the various components of a compounding machine.

A compounding line is a machine that can run any material you want. They are commonly used in resin makers’ finishing lines and have segmented barrels and screws that alternate conveying and mixing, venting, and adding filler. Because they run fast and have little intermeshing, these machines generate a large amount of heat and require intense cooling. A comparison of the most common compounds and extruders isn’t possible in this article.

Optimal temperature

When it comes to pvc extrusion, the optimum temperature is not determined by the actual extrusion speed. Instead, it’s governed by several parameters. The temperature of the barrel, the die, and the head are set to midpoints in the temperature range. Some users may find it necessary to adjust these zones, depending on the type of material flowing through the extruder. The rear barrel temperature is critical, as it controls the amount of compound that sticks to the barrel wall. A too high temperature in this zone can cause overheating and a poor output.

The screw design plays a crucial role in extrusion, and many rigid PVC profile and pipe manufacturers underestimate the role of optimized screw design in the final product. This is a problem, given that the materials used in the manufacturing process vary widely, including additives, fillers, and raw materials. It’s not possible to simply switch out screws based on the product. In addition, many extruders don’t have the best formulations, limiting their ability to produce high-quality PVC products.

Cooling systems

With the advancements in cooling technology for plastic pipes, it is easy to see how the plastic pipe industry is advancing and how it can benefit your company. Conair’s Bob Bessemer, a sales manager, explains how to make the most of modern technology and how you can maximize your cooling efficiency. Extrusion operations have come a long way from the static baths of water. The rise of water supply and disposal costs nearly put an end to this method, so intelligent cooling technology was born.

For example, an internal pipe cooling system will suck ambient air through the center of the pipe, against the direction of the extrusion. This system based on the vortex tube principle is effective in cooling the entire pipe, but the internal surface of the pipe must be properly cooled to avoid shrink holes. Internal pipe cooling concepts also take into account the temperature dependency of the viscosity, which is the reason many manufacturers use internal cooling systems.

Wie glättet man 3D-Druck-Linien?

How to Smooth 3D Print Lines

How to smooth 3d print lines is a question you may be asking yourself. After all, you want your 3D model to look great, and you don’t want any rough edges to ruin your model. In this article, we will take a look at some of the methods for smoothing out your 3D model. These methods include Sanding, Heat gun, and Paint. Read on to learn more. This article is a great place to start!

Resin coats

Resin coats are a great way to smooth 3D print lines and layers. They fill in layers and add a glossy finish. These finishes can be sanded or painted. Using an epoxy resin, such as XTC-3D, is important when using 3D printers. Make sure to wear protective eyewear and work in a well-ventilated area. If you do not have access to a 3D printer, you can purchase a two-part epoxy resin from hardware and craft stores.

Epoxy resin is a versatile coating material for 3D prints. It is safe, efficient, and can last for years without harming the model. It works on most 3D objects and is compatible with both SLS and SLA prints. Epoxy resin can be applied to rigid media such as EPS, EPDM, urethane foam, cardboard, wood, and plaster. It will smooth out any lines and grooves in your prints and will help your print stand out from the crowd.


After you have finished printing your 3D model, you’ll need to start sanding the lines. If your piece is very detailed, you can use a coarser grit to smooth out the lines. To prevent over-sanding and damage to the print, work in slow circular motions. You should also make sure to use a respirator. You may end up with some dust, but this is normal.

After sanding your 3D print, you might find gaps in it. These are typically caused by the dissolving of soluble supports or by toolpath constraints. If they’re small, you can fill them with epoxy. This will probably not need additional processing. However, if they’re large, you may want to use an autobody filler. This will require additional sanding after the filler has fully cured, but it’s a good filler and can be painted once it’s dry.

Heat gun

There are many ways to smooth 3D print lines, but the heat gun is one of the most effective. First, remove any supports or bridges from your print. You may already know how to do this, but if not, you can follow these instructions. The heat gun will melt PLA at 140 degrees Fahrenheit, so be sure to keep your hands cool. Once you’ve cooled down the piece, smooth out any remaining lines.

To use the heat gun to smooth 3d print lines, you’ll need to carefully move the heat gun along the print. This will remove any ridges. It is best to use a low-setting heat gun, but it may be too hot and destroy your 3D print. Make sure to pre-sand the PLA print before using the heat gun. This will expose more of the plastic, making the final effect more impressive. Using a heat gun to smooth 3D print lines will take some practice, but it’s worth it!


Using a liquid metal polish to smooth 3D print lines is a great way to enhance the quality of your 3D prints. Simply apply the polish to the print surface with a soft cloth and rub in a circular motion, against the grain. This will smooth out the lines, filling in the microstriations. You can then use a clean, unused cloth to buff the surface. You can find liquid metal polish at Amazon.

Before you apply the paint, you must first apply a primer coat to your 3D print. Different brands of primers will recommend different methods, including spraying the underside of the print. Always apply a primer coat to the 3D printed part before you start painting it. This step will ensure that the paint adheres to the print. If you plan to paint your 3D print afterward, you should follow the manufacturer’s recommendations.


Using a primer to cover your 3D print is an excellent way to ensure the paint sticks properly to your model. Unlike paint, a primer can also make your 3D print look better. 3D printing is notorious for having layer lines. However, you can fix this problem by sanding off the print, applying an epoxy resin coating, or melting the surface with a chemical solvent. If you choose to use a primer, make sure to choose a quality spray-on filler.

A good primer should be applied in short, even strokes about six to eight inches away from the part. You want to make sure that the primer doesn’t pool or create a ‘bumps and bumps’ effect on your 3D print. Using a tack cloth can help remove any primer dust. It is also helpful to use a rag to wipe off any excess primer on the print.

Welches 3D-Druckmaterial ist sehr flexibel?

Welches 3D-Druckmaterial ist sehr flexibel?

When it comes to choosing a filament, the flexibility of the 3D printing material will vary depending on its chemical composition and the type of Thermoplastics Elastomers. Some filaments are very flexible like car tires, while others have a degree of elasticity similar to soft rubber bands. The degree of flexibility is measured by the Shore Hardness Ratings of the filament, with a lower number indicating more flexibility. One of the most popular 3D printing filaments is TPU (Thermoplastic Polyurethane).


TPU is a very flexible material. Its high shore hardness provides extra tensile and shear strength, but can also decrease the material’s flexibility. To increase flexibility in your TPU prints, increase the amount of infill and outer walls. This will help reduce the amount of material that stretches when yanked in and out of the hotend. As with other 3D printing materials, there are a few things you should do to get the best results.

TPU is a very flexible 3d print material. This material is more durable than ABS or nylon. ABS or nylon hinges will show stress marks and cracks after being stretched. There are many types of flexible 3d printing filament. Sainsmart TPU is a popular option. TPU has many benefits. It’s also compatible with many 3D printers.


TPE is a flexible plastic that is commonly used in 3D printers. It has a shore hardness of 85 and tensile strength of 30 MPa. However, it isn’t recommended for objects that require extreme flexing or bendability. For that reason, it should be printed slowly and carefully, at a speed of about 20mm per second. Here are a few tips for printing with TPE.

TPE filament should be stored in a dry place. If stored in an unprotected environment, it may warp and bend the printed object. If it becomes wet during printing, it should be stored in an airtight container. Another disadvantage of TPE is that it is easily soaked in water, resulting in a brittle print. TPC is also used in various industrial applications. Some companies use this material in making self-expanding polymer stents.


The biggest disadvantage of PETG filament is that it doesn’t like to be squished during the printing process. To overcome this problem, the first layer should be printed with a large gap between the nozzle and the bed. The filament can also be prone to skimping, which can lead to stringing effects and buildup around the nozzle. It’s also recommended to increase the first layer’s print speed and reduce the temperature.

One of the major advantages of PETG over ABS is its durability. Unlike ABS, PETG is less expensive and easier to work with. This property makes it a great choice for making a number of different items, including functional prototypes and end-use parts. Although this material is not as flexible as ABS, its high mechanical strength makes it an excellent choice for a variety of applications. In particular, PETG is suited for printing objects that need to be impact-resistant and durable.


There are two main types of PLA filament: standard and soft. Standard PLA is rigid and does not bend well. Soft PLA has a rubber-like texture and a Shore hardness of 92A. It is flexible and resilient, and can be used in many domestic and industrial applications. It is also less expensive than TPU, which can be more difficult to print. PLA is not recommended for use in medical applications because of the risk of infection, while ABS is ideal for medical applications.

While traditional PLA is rigid and easy to print, Paramount 3D makes PLA that is less rigid but has more give. This material is great for making flexible gaskets, but not for shelf brackets. And it would be a terrible sole for a shoe. However, it is still recommended for making parts of your body that require flexibility. Generally, you can find filaments at Amazon. Keep in mind that prices do fluctuate on Amazon.


The first truly flexible material on the market is NinjaFlex, an extrudable thermoplastic elastomer filament that is compatible with RepRap, MakerBot, and Airwolf 3D printers.

Ninjaflex 3D printing material is extremely flexible and durable. It has the same printability as PLA and ABS, but is much more pliable. It’s especially good for creating flexible, durable projects, including props for cosplay. Ninjaflex is also ideal for making seals, plugs, and leveling feet. It’s one of the few filaments that has the properties to resist buckling, making it an ideal choice for high-quality models.

Was ist der Vasenmodus im 3D-Druck?

Was ist der Vasenmodus im 3D-Druck?

Are you wondering what is vase mode and how it works with 3D printing? Then read this article. It will explain the differences between the Spiralise Outer Contour and vase modes on both the PrusaSlicer and Cura. You can then decide which type of print you’d like to create. And once you’ve made your decision, start the printing process. To print a vase, you need to have at least a few basic knowledge about 3D printing.

Cura’s vase mode

The vase mode on Cura is a 3d printing feature that allows you to turn solid objects into vases. Vases do not need support structures or roofs. All you need is a single perimeter around the object, and a bottom layer. In order to print a vase with a single border, you must use a large nozzle. Printing too quickly with a single nozzle can lead to printer overheating.

Cura’s Spiralise Outer Contour

Spiralise Outer Contour in Cura is a powerful special mode that allows 3D printing of large objects and invalid models. In the Spiralize mode, solid 3D models are converted into spiraling toolpaths, which print walls one line wide around the model. This makes 3D printing with Spiralise very efficient. There are a few things you need to know before you start printing.

PrusaSlicer’s vase mode

The PrusaSlicer’s vase modes can be accessed in the slicer’s settings panel. The spiral vase option is available in Print Settings > Layers and Perimeters. Selecting this option automatically alters your settings to print in vase mode. In addition, you can adjust the settings manually. This article will discuss the different types of objects that you can 3D print in vase mode.

Prusa’s Spiralise Outer Contour

The Cura software has many useful features and includes the “Vase Mode”, which enables you to print aesthetic objects without using real layers. The Cura software prints objects in a spiral pattern, and thus requires less material than other 3D printing processes. You can also use this mode to print almost any model. Listed below are some benefits of using this mode.

Spiral vase mode

Spiral vase mode 3d printing is not suited for large objects or solid parts. Instead, it creates a smooth, spiral surface in which the printhead rises at a constant rate. Spiral vase mode does not have infill and does not create solid areas at the top of the object. You should choose this mode carefully for the best results. But it is important to note that if you need to print a large object in this mode, you should print it in a slower speed.

Cura’s Spiral vase mode

The Spiral vase mode in Cura is an excellent 3d printing method, allowing users to create beautiful, seamless objects. The method relies on a single outer contour for the object to be printed, so many ‘normal’ vase models will still print. However, you should be aware that this mode is not compatible with all 3D models – in particular, those that have multiple parts and/or multiple bed anchor points. This will lead to unpleasant prints and prolonged print time.

Prusa’s Spiral vase mode

Spiral vase mode 3d printing is a popular print mode for Prusa. You can find this option on the simple print settings menu in PrusaSlicer. This mode automatically adjusts settings and works best with solid objects. This mode is not recommended for models with multiple parts or bed anchor points. It may result in a Z-seam when printing. Read on to learn more.